VoI.4 No.5
May.2010
中国科技论文在线SCIENCEPAPER
ONLINE
第5卷第5期
2010年5月
炼油废水的处理方法及工艺特征
范荣桂,郝方
(辽宁工程技术大学资源与环境工程学院,辽宁阜新,123000)
摘
要:针对炼油废水具有污染物浓度高、可生化性差、成分复杂且其所含有毒有害物质对生态系统、植物、土壤和
水体有严重影响等特点,分别介绍了物理、物理化学及生物法对炼油废水的处理原理及其各自的工艺特征,通过对组
合工艺各级处理方法运行及处理效果的比较,提出运用多种技术相结合的处理方法,最终达到提高炼油废水处理效率
和减小环境二次污染风险的目的,使处理出水可成为重要的回用水资源,缓解水资源紧缺状况。
关键词:环境工程,炼油废水;物理方法;物理化学方法;生物法;综合工艺
中图分类号:X703
文献标识码:A
文章编号:1673—7180(2010)05—0410—5
Methods
and technical characteristics for oil・refining
wastewater
treatment
Fan Ronggui,Hao Fang
(College
ofResource
andEnvironmentalEngineering,Liaoning Technical
Universi(v,Fuxin,Liaoning
123000,China)
Abstract:Oil-refinery
wastewaters,with the chanractorisfics of
lli曲pollutant
concentrations,poor biodegradability,
complex
components,and
high toxicity,do great harm
to
ecosystems,plants,sois,1 and waters.The physical,physical-
chemical and biological treatment methods and technical characteristics for the
oil-refinery
wastewater
w6ffl:introduced.By
comparing
the operational
requirements
and the treatment effects ofdifferent methods,a comprehensive
treatment
technology
was proposed for oil-refining wastewater I/ealment.This technology
can
not
only
improve
the
efficiency
of
refinery
wastewater treatment and reduce the risk of secondary pollution of
environment,but
also make
reuse
of the
effluent
and
mitigate
the water shortage situation.
Keywords:oil-refinerywastewater;physicalmethods;physical-chemicalmethods;biologicalmethods;comprehensive
treatment
technology
0炼油废水的产生及其特征
炼油废水主要来自于原油的直接蒸馏、重质油的裂
化与蒸馏以及某些馏分的精制等过程中产生的生产废
水。一般是根据废水水质进行分类分流的,包括游离态
含油废水、乳化油废水、冷却水、锅炉排水、含硫废水、
含碱废水、含酸废水以及一些特殊化合物废水等¨剖。其
特点体现在:
1)污水量大,废水组分复杂,有机物特别是烃类
及其衍生物含量高,并且含有多种重金属。
2)除一般有机物外,主要的污染物还有油脂、酚
类、硫化物和氨氮等,其COD含量较高,难降解物质
多,而且受碱渣废水和酸洗水的影响,废水的pH变化
较大。
3)粒径介于100~1
000
lira的微,J、油珠易被表面活
性剂和疏水固体所包围,形成乳化油,稳定地悬浮于水
中,这种状态的油不能用静置法从废水中分离出来。而
大于100 lain的呈悬浮状态的可浮油,可以依靠油水相
收稿日期:2010-03・23
作者简介:范荣桂(1962一),男,副教授,主要研究方向:水污染控制理论与技术、清洁生产与可持续发展,fmaronggui@163.tom
万方数据