模式 1:读取整梯程序到 MC 卡里
Mode 1:Read the whole steps procedure arrive MC card an inside
模式 2:读取电梯参数区数据到 MC 卡里
Mode 2:Read the elevator parameter area data arrive the inside of the
MC card
模式 3:读取电梯 F1 段程序数据到 MC 卡里
Mode 3:Read the procedure data of the elevator F1 segment arrive the
inside of the MC card
模式 4:读取电梯 F2 段程序数据到 MC 卡里
Mode 4:Read the procedure data of the elevator F2 segment arrive the
inside of the MC card
模式 5:将 MC 卡内整梯程序下载到主板上
Mode 5:The whole steps procedure in the MC card the download arrive
lord plank top
模式 6:将 MC 卡内电梯参数区数据下载到主板上
Mode 6:The elevator parameter area data in the MC card the download
arrive lord plank top
模式 7:将 MC 卡内电梯 F1 段程序下载到主板上
Mode 7:The elevator F1 segment in the MC card procedure the download
arrive lord plank top
模式 8:将 MC 卡内电梯 F2 段程序下载到主板上
Mode 8:The elevator F2 segment in the MC card procedure the download
arrive lord plank top
其他模式没有启用
The other mode was in use
备注:电梯整梯程序=F1 段+F2 段
Remarks:Elevator the whole steps procedure=F1 segment+F2 segment
使用方式 2:连接电脑状态
Usage way 2:Conjunction computer appearance
软件通过 USB 口虚拟串口对 MC 卡进行数据的读写。使用前必须正确安装驱动程序及设
置正确的通讯端口号。
The software pass an USB a conjecture string to carry on a read and
write of data to the MC card.Usage front have to exactitude install drive
the communication port of procedure and constitution exactitude number.
软件界面如下:
Software interface is as follows: