鳃嗣雹缝四昌留固脑髓晷醣腿鼢费魍蛆鑫
芮
曼1
周杰敏2许嘉炯1
邬亦俊1
吴国荣1
(1上海市政工程设计研究总院,上海200092;2上海建科建设监理咨询有限公司,上海200032)
摘要初步总结了饮用水处理超滤膜系统工艺设计的关键技术。净水厂超滤膜系统设计前应
通过中试获得特定水质条件下准确的膜通量和系统回收率等设计参数,设计时仔细计算,复核比选,
在考虑备用量,确保安全性的前提下尽量减少投资。膜系统布局强调合理、紧凑、美观,方便操作,管
路布置要流畅,管材选用和设备选型需因地制宜,安全耐用。
关键词
饮用水处理超滤膜工程设计
关键技术
Key techniologies of the ultrafiltration
membrane
drinking
water
treatment
design
Rui
Minl,Zhou
J
iemin2,Xu
Jiaj
ion91,Wu
Yij
unl,Wu
Guoron91
(】.Shanghai
Municipal
Engineering Design General Institute,Shanghai 200092,China,
Z
Shanghai
J
ianke
Project
Management
Co.,LtcL,Shanghai
200032,劬ina)
Abstract:The
key technologies of ultrafiltration membrane drinking
water
treatment design
were
primarily generalized.Before the
design
of the ultrafiltration membrane system for
drinking
water
treatment plant,the pilot
test
must be carried
out to
get
the design parameters,such
as
accurate
membrane flux
and
system
recycling rate.During
the design,careful calculation and
re—
check should be
carried
out
and the investment should be reduced based
on
the consideration
of the
reserve
level and safety security.The membrane system layout should be reasonable,compact,
beautiful,easy operation,the pipeline layout should be affluent,the
pipe
material and equipment
selection should be suitable for the circumstances,safe and durable.
Key嗍rds:Drinking
water treawnent;Ultrafiltration
membrane;Engineering
design;Key technology
0引言
超滤膜技术作为饮用水处理的一个独立工艺,
是水处理领域近20年来重要技术突破[1],其出水水
质优良,微生物安全性高。近年来随着制膜工艺的
进步,膜产品价格的降低,促使超滤膜技术在净水厂
中的应用规模化。
在国外,特别是美国和欧洲,选择超滤膜用于净
水厂呈加速发展趋势,成功的运行案例很多[2],国外
在超滤膜系统设计和建设上有较多实际经验,逐步
形成完善的技术理论和设计规范。而在我国,市政
净水厂超滤膜技术的规模化应用才刚刚起步[3],虽
然其处理饮用水的理论研究已趋于成熟,但其规模
化设计建造的工程经验和技术总结很少,尚无成熟
设计规范。结合我院多年相关工程经验,在研究国
内外成功案例和技术规范的基础上,初步总结净水
厂超滤膜系统设计的关键技术,为今后国内超滤膜
水厂的设计应用提供参考。
1超滤膜系统设计关键步骤
1.1超滤膜系统的构成与分类
国内外有较多专门从事膜技术研发和生产的技术
公司,各家产品不完全相同,仅超滤膜材质就有PVDF
(聚偏氟乙烯)、PP(聚丙烯)、PVC(聚氯乙烯)、H§(聚
醚砜)、PS(聚苯乙烯)和CA(醋酸纤维素)等。在工程
实际应用中,超滤膜组件分为柱状膜和浸没式膜两种
形态,其中柱状膜可为内压式,也可为外压式,浸没式
膜为外压式。应用上可分为柱状膜错流过滤、柱状膜
给水排水V01.36
N仉1
2010
21
万方数据